Item no.: 12223V2
- Description
- Manuals
- Information ElectroG3
![](absima_en/prodpic/galerie/12223v2_shop.jpg)
![](absima_en/prodpic/galerie/at3.4v2-banner.jpg)
![](absima_en/prodpic/galerie/abs12223v2_4.jpg)
The success story continues! We have equipped the AT3.4 "V2" with some new features that bring the vehicle to the next level of evolution.
![](absima_en/prodpic/galerie/12223v2_01kopie.jpg)
![](absima_en/prodpic/galerie/12223v2_02kopie.jpg)
Some technical changes have been implemented in our 1/10th scale truggy - among other things, the vehicle now comes with LED lighting on the roof
![](absima_en/prodpic/galerie/12223v2_05.jpg)
![](absima_en/prodpic/galerie/highlights-blue-green.jpg)
- NEW* 80A brushed speed controller withT-connector and 540 motor
- NEW* Programmable speed controller
- NEW* 15kg steering servo with metal gears
- NEW* LED lighting
- NEW* Race body with many add-on parts
- NEW* even more option parts available
![](absima_en/prodpic/galerie/speedsheet1-10br.jpeg)
![](absima_en/prodpic/galerie/features-blue-green.jpg)
![](absima_en/prodpic/galerie/12222v2_12.jpg)
The new 80A Brushed speed controller is waterproof, programmable and pre-configured with a T-connector. To fully exploit the potential of the vehicle, we recommend a 2S LiPo battery for operation. In addition, a separately available programming card (item 2110061) can be used to set various parameters such as braking force, punch, low voltage protection and more.
![](absima_en/prodpic/galerie/unknown.jpeg)
![](absima_en/prodpic/galerie/2030005_truggy.jpg)
The car is powered by a 540size 15T brushed motor that directly accesses the all-wheel drive system. The two differentials (front and rear) are driven by an aluminum driveshaft. Due to the higher power of the speed controller and the use of T-connectors, any 2S LiPo battery can be used - no matter what the C-rate and capacity.
4 oil-pressure shock absorbers provide ideal handling, so there is plenty of driving fun. A 15kg metal gear servo with takes over the implementation of the steering commands.
![](absima_en/prodpic/galerie/12223v2_08kopie.jpg)
![](absima_en/prodpic/galerie/12223v2_09kopie.jpg)
Lightweight and compact design, as well as comfortable and ergonomically shaped - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, making adjustments easy via levers and knobs. In addition, the remote control has a "Beginner Mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have so much experience with the handling of such RC vehicles.
![](absima_en/prodpic/galerie/unknown2.jpeg)
![](absima_en/prodpic/galerie/unknown3.jpeg)
- 4WD all wheel drive
- 2.4 GHz 4-channel radio system
- 80A brushed speed controller with T-plug
- 540size 15T motor with 32.000RPM @ 7.4V
-
15kg MG steering servo (25T, ball bearings)
-
Oil shock absorbers
- Ball bearing main drive
-
Extremely durable composite plastic parts
-
Steel differential outputs
-
Aluminum main drive shaft with steel mounts
-
Adjustable upper tie rods
-
5mm aluminum motor mount
-
6mm shock towers
-
2 differentials (front/rear)
-
Stylish truggy body with add-on parts
-
"Light-Weight" chassis (less weight - longer drive time)
- Many aluminum option parts available
![](absima_en/prodpic/galerie/tec-spec-blue-green.jpg)
-
Scale: 1:10
-
Dimensions (L/W/H): 405x325x165 mm
- Weight: 1740g
- Wheelbase: 270mm
-
Ground clearance: ca. 35mm
-
Track width: 270mm front/rear
- Wheels front/rear: Ø 105mm / Width: 55mm
- Shock absorber oil: 400CPS
- Shock absorber installation length: 90mm
- Motor ratio: pinion: 18T / main gear: 64T (module 0,6)
![](absima_en/prodpic/galerie/scope-of-delivery-blue-green.jpg)
![](absima_en/prodpic/galerie/12223v2_11.jpg)
- 1/10 Truggy "AT3.4V2" RTR
- 2.4GHz "CR4S" radio
- Sticker sheet
- Manual
![](absima_en/prodpic/galerie/accessories-blue-green.jpg)
- 4x AA Batteries for radio
- 7.2V NiMH or 7.4V* LiPo car battery (*recommended)
- Charger (suitable for car battery)
- Programm card for individual settings of the speed controller
![](absima_en/prodpic/galerie/12223v2_12243v2_a01.jpg)
![](absima_en/prodpic/galerie/12223v2_12243v2_a02.jpg)
![](absima_en/prodpic/galerie/12223v2_12243v2_a04.jpg)
Spare Parts for this item:
Option part for this item:
Average customer rating:
Number of Customer reviews: 0