Item no.: 4200030
- Description
- Information ElectroG3
- Manuals
This starter kit is the ideal worry-free package for getting started in the RC hobby. LiPo batteries provide more power with less weight and are perfect for both BRUSHED and BRUSHLESS RC cars. Thanks to its user-friendly operation (Plug and Play), this set is also perfect for beginners.
Charger Specifications:
USB-A Charger
Input Voltage: 100-240V
Max. Output Power: 2A/5V
Battery Type: LiPo; Li-Ion 2S/7.4V
Charging Control: Status LEDs (red/green)
Protection Mode: Overvoltage; Short Circuit; Reverse Polarity
Connector: T-Plug
Dimensions (L/W/H): 75x23x12mm
Weight: 20
Input Voltage: 100-240V
Max. Output Power: 2A/5V
Battery Type: LiPo; Li-Ion 2S/7.4V
Charging Control: Status LEDs (red/green)
Protection Mode: Overvoltage; Short Circuit; Reverse Polarity
Connector: T-Plug
Dimensions (L/W/H): 75x23x12mm
Weight: 20
Battery Specifications:
Suitable for 1:10 RC Cars (almost all types)
Battery Type: LiPo
Capacity: 4000mAh
Voltage: 2S/7.4V
Power Cable/Connector: 12AWG Silicone Cable/T-Plug
Dimensions (L/W/H): 138x47x25mm
Weight: +/-235g
Battery Type: LiPo
Capacity: 4000mAh
Voltage: 2S/7.4V
Power Cable/Connector: 12AWG Silicone Cable/T-Plug
Dimensions (L/W/H): 138x47x25mm
Weight: +/-235g
Scope of delivery:
1* LC-2.0USB charging cable (without power supply unit)
1* LiPo 2S/7.4V 4000mAh
1* LC-2.0USB charging cable (without power supply unit)
1* LiPo 2S/7.4V 4000mAh
Please note:
The charging speed may vary depending on the power supply unit. To be able to use the full power of the USB charging cable, you need a power supply unit with at least 10W power (output voltage 2A/5V) which supports fast charging. If you use a power supply unit with less power, the charging time will be extended accordingly.
For many BRUSHED RC cars, the vehicle configuration must be changed from NiMH to LiPo. This is usually done with so-called “jumpers” on the speed controller (ESC). Please be sure to follow the instructions in your vehicle manual, otherwise the battery may be damaged.
For many BRUSHED RC cars, the vehicle configuration must be changed from NiMH to LiPo. This is usually done with so-called “jumpers” on the speed controller (ESC). Please be sure to follow the instructions in your vehicle manual, otherwise the battery may be damaged.
Absima GmbH
Gibitzenhofstraße 127 A
DE 90443 Nürnberg
info@absima.com
Average customer rating:
Number of Customer reviews: 0