1:10 Brushed V2 Standard & Crawler ESC 80A waterproof

Item no.:  2100004V2
1:10 Brushed V2 Standard & Crawler ESC 80A waterproof - Image 1
1:10 Brushed V2 Standard & Crawler ESC 80A waterproof - Image 2
1:10 Brushed V2 Standard & Crawler ESC 80A waterproof - Image 3
1:10 Brushed V2 Standard & Crawler ESC 80A waterproof - Image 4
1:10 Brushed V2 Standard & Crawler ESC 80A waterproof - Image 11:10 Brushed V2 Standard & Crawler ESC 80A waterproof - Image 21:10 Brushed V2 Standard & Crawler ESC 80A waterproof - Image 31:10 Brushed V2 Standard & Crawler ESC 80A waterproof - Image 4
Absima
Absima
more articles from Absima
24,95 EUR
incl. VAT and excl. shipping
Total amount: {{ totalPrice }} EUR
pcs.
currently not available
This item notice Article is noted
Availability: (Delivery time: )
This item was seen more favorable elsewhere
  • Description
  • Manuals
  • Information ElectroG3
MORE POWER, MORE FEATURES, MORE FUN !
 
 
 
We proudly present our new programmable "ALL-IN-ONE" BRUSHED SPEED CONTROLLER which can be used for 1:10 RC Crawlers and also Race Cars. The basic setting for the vehicle and battery type is done via "jumpers" on the ESC. In addition, a programming card is available, which can be used for even more settings.
 
HIGHLIGHTS:
  • One ESC for all vehicle types (Crawler, Off-road, On-road, Boot)
  • Programmable via jumper and separately available programming card (Item: 2110061)
  • 2-3S LiPo capable
  • Continuous load: 80A
  • BEC: 5A / 6.0V
Programmable Features (via programming card): 
  • Initial Start Force: 5%* / 13% / 21% / 29% 
  • Low V cut-off: 3.1V* / 3.4V / Off
  • Crawler Setup - Initial Drag Brake: 100%* / 90% / 80% / 70%
  • Standard Setup - Max Brake Force: 50%* / 100% / 75% / 25%
  • Max Reverse Force: 50%* / 75% / 100%
  • Start Mode (Punch): Medium* / Strong / Soft
 
 
Standard Features:
  • Waterproof and dustproof - suitable for all weather conditions (Clean and dry the ESC after each use to avoid corrosion).
  • Specially designed for BRUSHED RC Cars and Crawlers for excellent acceleration and sensitive driving feel.
  • Low internal resistance and excellent heat dissipation.
  • Multiple protection functions such as low voltage cutoff for LiPo and NiMH batteries, ESC overheat protection and signal loss protection.
  • Leicht zu programmieren durch Jumper und Programmierkarte im Taschenformat (separat erhätlich - Art. 2110061)
Specification:
  • Continuous/short time load: 80A/320A
  • Resistance: 0.0014ohm
  • Motor type: Brushed standard motors 
  • Battery: 2-3S LiPo / 5-9 cells NiMH
  • BEC 6.0V/5A
  • Motor Limit 2S LiPo/5-6 cells NiMH: ≥ 11T or <25,000rpm.
  • Motor Limit 3S LiPo/7-9 cells NiMH: ≥ 18T or <17,000U/min.
  • Cable lengths: BEC: 180mm / Motor: 200mm / Power: 200mm
  • Dimensions: 41.5*35*29.5mm
  • Weight: 63.4g
Scope of delivery:
  • 1:10 Brushed Speed Controller V2
  • Adhesive Tape
  • Manual
Average customer rating: 
Number of Customer reviews: 0
Write an online review of this item and show it to other visitors!