Item no.: 2100022V2
- Description
MORE POWER, MORE FEATURES, MORE FUN !
We proudly present our new programmable "ALL-IN-ONE" BRUSHED SPEED CONTROLLER which can be used for 1:10 RC Crawlers and also Race Cars. The basic setting for the vehicle and battery type is done via "jumpers" on the speed controller. A programming card is also available, which can be used for even more settings.
HIGHLIGHTS:
- One ESC suitable for all vehicle types (crawler, off-road, on-road, boat)
- Programmable via jumper and separately available programming card (Item 2110061)
-
2S LiPo operation recommended
- Motor ready soldered - plug-n-play
Programmable features (via programming card):
- Initial Start Force: 5%* / 13% / 21% / 29%
- Low V cut-off: 3.1V* / 3.4V / Off
- Crawler Setup - Initial Drag Brake: 100%* / 90% / 80% / 70%
- Standard Setup - Max Brake Force: 50%* / 100% / 75% / 25%
- Max Reverse Force: 50%* / 75% / 100%
- Start Mode (Punch): Medium* / Strong / Soft
Standard Features ESC:
- Waterproof and dustproof - suitable for all weather conditions (Clean and dry the ESC after each use to avoid corrosion).
- Specially designed for BRUSHED RC Cars and Crawlers for excellent acceleration and sensitive driving feel.
- Low internal resistance and excellent heat dissipation.
- Multiple protection functions such as low voltage cutoff for LiPo and NiMH batteries, ESC overheat protection and signal loss protection.
- Easy to program with pocket-sized jumper and programming card (sold separately - item 2110061)
Specification ESC:
-
Continuous/short-term load: 80A/320A
- Resistance: 0.0014ohm
- Suitable motor types: Brushed standard motors
- Battery recommendation: 2S LiPo / 6 cells NiMH
- BEC 6.0V/5A
- Motor limit 2S LiPo/5-6 cells NiMH: ≥ 11T or <25.000RPM
- Measure: 41.5*35*29.5mm
- Plug system: T-plug
- Weight: 63.4g
Specification B-Spec Motor:
- Turns: 27T
- Speed: 14.500RPM
- Output power: 100W
- Operating voltage: 7.2-7.4V
- Technical Size: 540
- Motor shaft: Length 12,3mm; Ø 3,18mm
- Motor size: Length 53,2mm; Ø 35,7mm
- Ball bearings: 2
- Weight: 165g
Lieferumfang:
- 1:10 Brushed V2 Speed Controller
- Thrust B-Spec Brushed Motor
- Adhesive Tape
- Manual
Average customer rating:
Number of Customer reviews: 0