1:10 EP Monster Truck ""AMT3.4-V2 BL"" 4WD Brushless RTR

Item no.:  12244V2
1:10 EP Monster Truck ""AMT3.4-V2 BL"" 4WD Brushless RTR - Image 1
1:10 EP Monster Truck ""AMT3.4-V2 BL"" 4WD Brushless RTR - Image 2
1:10 EP Monster Truck ""AMT3.4-V2 BL"" 4WD Brushless RTR - Image 3
1:10 EP Monster Truck ""AMT3.4-V2 BL"" 4WD Brushless RTR - Image 4
1:10 EP Monster Truck ""AMT3.4-V2 BL"" 4WD Brushless RTR - Image 5
1:10 EP Monster Truck ""AMT3.4-V2 BL"" 4WD Brushless RTR - Image 6
1:10 EP Monster Truck ""AMT3.4-V2 BL"" 4WD Brushless RTR - Image 7
1:10 EP Monster Truck ""AMT3.4-V2 BL"" 4WD Brushless RTR - Image 11:10 EP Monster Truck ""AMT3.4-V2 BL"" 4WD Brushless RTR - Image 21:10 EP Monster Truck ""AMT3.4-V2 BL"" 4WD Brushless RTR - Image 31:10 EP Monster Truck ""AMT3.4-V2 BL"" 4WD Brushless RTR - Image 41:10 EP Monster Truck ""AMT3.4-V2 BL"" 4WD Brushless RTR - Image 51:10 EP Monster Truck ""AMT3.4-V2 BL"" 4WD Brushless RTR - Image 61:10 EP Monster Truck ""AMT3.4-V2 BL"" 4WD Brushless RTR - Image 7
4250650957506
289,95 EUR
incl. VAT and excl. shipping
Total amount: {{ totalPrice }} EUR
currently not available
This item notice Article is noted
Availability: (Delivery time: )
  • Description
  • Manuals
  • Information ElectroG3
 
 
     
The success story continues! We have equipped the AMT3.4 "V2" with some new features that bring the vehicle to the next level of evolution.
      
 
Some technical changes have been implemented in our 1/10th scale Monster Truck - among other things, the vehicle now comes with LED lighting on the roof.
 
  • NEW* 60A brushless speed controller with T connector and 3421KV motor
  • NEW* Programmable speed controller
  • NEW* 15 kg steering servo with metal gear
  • NEW* LED lighting
  • NEW* Monster Truck body with many add-on parts
  • NEW* even more option parts available

 
 
 
 
The new 60A brushless speed controller is waterproof, programmable and pre-configured with a T-connector. To fully exploit the potential of the vehicle, we recommend a LiPo 2S/7.4V battery for operation. In addition, a separately available programming box (item 2110062) can be used to adjust various parameters such as braking force, punch, low-voltage protection and more.
 
 
The car is powered by a 3421KV brushless motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminium drive shaft. A 15kg metal gear servo handles the conversion of the steering commands. 
The motor/controller unit can also be powered by a 3S/11.1V LiPo battery (note the size of the battery compartment!), but this increases the wear and tear on the vehicle extremely. Also the handling becomes almost impossible due to the enormous over-motorization. Therefore, we generally advise against 3S driving.

4 adjustable aluminum oil-pressure shock absorbers offer ideal handling, so that a lot of driving fun. The spring preload can be adjusted via a knurled screw. Thus, the chassis can be perfectly adapted to your needs.
 
      
Lightweight and compact design, as well as comfortable and ergonomically shaped - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, making adjustments easy via levers and knobs. In addition, the remote control has a "Beginner Mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have so much experience with the handling of such RC vehicles.
 
      
  • 4WD all wheel drive
  • 2.4GHz 4-channel radio system
  • 60A brushless speed controller (waterproof; T plug; programmable)
  • 3421KV brushless motor (sensorless; splash-proof)
  • 15kg metal gear steering servo (25T; ball bearings
  • 8 Aluminium oil shock absorbers
  • Ball bearing main drive
  • Extremely durable composite plastic parts
  • Steel differential outdrives
  • Aluminium main drive shaft with steel mounts
  • Adjustable upper tie rods
  • 5mm aluminium engine mount
  • 6mm shock towers
  • 2 differentials (front/rear)
  • Stylish Monster Truck body with add-on parts
  • "Light-Weight" chassis (less weight - longer driving time)
  • Many aluminum option parts available
 
    • Scale: 1:10
    • Dimensions (L/W/H): 425x300x200 mm
    • Weight: 2090g
    • Wheelbase: 270mm
    • Ground clearance: approx. 45mm
    • Track width: 250mm front/rear
    • Wheels front/rear: Ø 116mm / Width: 57mm
    • Shock absorber oil: 400CPS
    • Shock absorber installation length: 100mm
    • Motor ratio: 17T / main gear: 64T (module 0.6)  
     
     
    • 1/10 Brushless Monster Truck "AMT3.4BLV2" RTR
    • 2.4GHz CR4S radio
    • Sticker sheet
    • Manual
     
     
     
     
     
     
    Accessoires for this item:
    Spare Parts for this item:
    Option part for this item:
    Absima GmBH
    Gibitzenhofstraße 127 A
    DE 90443 Nürnberg
    info@absima.com
    Average customer rating: 
    Number of Customer reviews: 0
    Write an online review of this item and show it to other visitors!