Item no.: 12221V2
- Description
- Manuals
- Information ElectroG3
![](absima_en/prodpic/galerie/12221v2_a01.jpg)
The success story continues! We have equipped the ATC3.4 "V2" with some new features that take the vehicle to the next level.
![](absima_en/prodpic/galerie/abs12221v2_wei_2.jpg)
![](absima_en/prodpic/galerie/12221v2_03kopie.jpg)
![](absima_en/prodpic/galerie/12221v2_07kopie.jpg)
The chassis comes with 2 sets of wheels ! One set chrome colored on-road wheels for smooth surfaces like asphalt and one set slightly larger white rally wheels for loose surfaces like sand and gravel.
![](absima_en/prodpic/galerie/12221v2_wheels.jpeg)
![](absima_en/prodpic/galerie/highlights-blue.jpg)
- NEW* 80A brushed speed controller with T-plug and 540size 15T Motor
- NEW* Speed controller is programmable
- NEW* 6kg steering servo
- NEW* Rally body design
- NEW* 2 wheel sets included - On-road und Rally
![](absima_en/prodpic/galerie/speedsheet3.4v2brushed.jpg)
![](absima_en/prodpic/galerie/features-blue.jpg)
![](absima_en/prodpic/galerie/abs12221v2_gross2.jpg)
The new 80A brushed speed controller is waterproof, programmable and pre-assembled with a T-connector. To fully exploit the potential of the vehicle, we recommend a 2S LiPo battery for operation. In addition, a separately available programming card (item 2110061) can be used to set various parameters such as brake strength, punch, low voltage protection and much more.
The car is driven by a 540 15T brushed engine which directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminum drive shaft. Due to the higher power of the speed controller and the use of T-plugs, any 2S LiPo battery can be used - no matter what C-rate and capacity.
![](absima_en/prodpic/galerie/12224_05.jpg)
![](absima_en/prodpic/galerie/2100004v2_01kopie.jpg)
4 oil-pressure shock absorbers provide ideal handling so that a lot of driving fun arises. If you choose the on-road tires, you can make hot drifts on smooth surfaces while the grooved profile of the rally tires provides traction on almost any surface. A 6kg servo takes over the implementation of the steering commands.
![](absima_en/prodpic/galerie/12221v2_14kopie.jpg)
![](absima_en/prodpic/galerie/2030003_01.jpg)
![](absima_en/prodpic/galerie/2000010_06-001.jpg)
![](absima_en/prodpic/galerie/2000010_05-001.jpg)
- 4WD all wheel drive
- 2.4GHz 4-channel radio system
- 80A brushed speed controller with T-plug
- 540size 15T Motor mit 32.000 U/min @ 7.4V
- 6kg steering servo (25T, ball bearing)
- 4 oil shock absorber
- Ball bearing main drive
- Extremely durable composite plastic parts
- Steel differential outdrives
- Aluminum universal joint drive with steel mounts
- Adjustable upper track rods
- 5mm aluminum motor mount
- 6mm shock towers
- 2 differentials (front/rear)
- Stylish touring car body
- Light-Weight chassis (less weight - longer driving time)
- Many aluminum option parts available
![](absima_en/prodpic/galerie/tec-spec-blue2.jpg)
- Scale: 1:10
- Dimensions (L/W/H): 470x200x150 mm
- Weight: 1400g
- Wheelbase: 260mm
- Ground clearance: ca. 15mm
- Track width: 170mm front/rear
- On-road wheels front/rear: Ø 65mm / Width: 26mm
- Rally wheels front/rear: Ø 70mm / Width: 26mm
- Shock-oil: 400CPS
- Damper installation length: 60mm
- Internal gear ratio: bevel gear: 13T / ring gear: 38T
- Motor ratio brushed version: Pinion: 26T / main gear: 58T (module 0.6)
![](absima_en/prodpic/galerie/scope-of-delivery-blue.jpg)
![](absima_en/prodpic/galerie/12221v2_lieferumfang.jpg)
- ATC3.4V2 On-Road/Rally Car RTR
- 2.4GHz CR4S radio system
- Plastic clips for shock absorbers
- Sticker
- Manual
![](absima_en/prodpic/galerie/accessories-blue.jpg)
- 4x AA batteries for the radio system
- 7.2V NiMH or 7.4V* LiPo car battery (*recommended)
- Charger (suitable for car battery)
- Programming card for individual settings of the speed controller
Spare Parts for this item:
Option part for this item:
Average customer rating:
Number of Customer reviews: 0