1:10 EP Sand Buggy "ASB1 CAMO-BLUE" 4WD RTR (incl. Bat/UK-charger)New

Item no.:  12208UK
1:10 EP Sand Buggy "ASB1 CAMO-BLUE" 4WD RTR (incl. Bat/UK-charger) - Image 1
1:10 EP Sand Buggy "ASB1 CAMO-BLUE" 4WD RTR (incl. Bat/UK-charger) - Image 2
1:10 EP Sand Buggy "ASB1 CAMO-BLUE" 4WD RTR (incl. Bat/UK-charger) - Image 3
1:10 EP Sand Buggy "ASB1 CAMO-BLUE" 4WD RTR (incl. Bat/UK-charger) - Image 4
1:10 EP Sand Buggy "ASB1 CAMO-BLUE" 4WD RTR (incl. Bat/UK-charger) - Image 5
1:10 EP Sand Buggy "ASB1 CAMO-BLUE" 4WD RTR (incl. Bat/UK-charger) - Image 6
1:10 EP Sand Buggy "ASB1 CAMO-BLUE" 4WD RTR (incl. Bat/UK-charger) - Image 7
1:10 EP Sand Buggy "ASB1 CAMO-BLUE" 4WD RTR (incl. Bat/UK-charger) - Image 11:10 EP Sand Buggy "ASB1 CAMO-BLUE" 4WD RTR (incl. Bat/UK-charger) - Image 21:10 EP Sand Buggy "ASB1 CAMO-BLUE" 4WD RTR (incl. Bat/UK-charger) - Image 31:10 EP Sand Buggy "ASB1 CAMO-BLUE" 4WD RTR (incl. Bat/UK-charger) - Image 41:10 EP Sand Buggy "ASB1 CAMO-BLUE" 4WD RTR (incl. Bat/UK-charger) - Image 51:10 EP Sand Buggy "ASB1 CAMO-BLUE" 4WD RTR (incl. Bat/UK-charger) - Image 61:10 EP Sand Buggy "ASB1 CAMO-BLUE" 4WD RTR (incl. Bat/UK-charger) - Image 7
Manufacturer: Absima
Absima
Availability:(Delivery time: 1-2 days)
169,95 EUR
incl. VAT and excl. shipping
pcs.

Highlights & Details:
- 40A waterproof speed controller
- 15T brushed motor
- 2.4 GHz CR2S remote control
- Battery and charger (EU plug) 
 
Features:
- Fully built and equipped all-wheel drive buggy incl. 2.4 GHz remote control, NiMH high-performance battery and charger
- Waterproof and LiPo compatible 40A brushed controller with Tamiya plug
- Water resistant and powerful steering servo with 4kg steering force
- 15 turn 550 size brushed motor with heat sink
- Fully enclosed main drive - prevents ingress of stones or other foreign objects
- Aluminum main drive shaft with steel mounts
- The vehicle is completely ball bearing mounted and therefore very smooth and durable
- Two built-in cone differentials transmit the torque optimally and compensate for speed differences, e.g. when cornering
- Differential outputs made of steel
- The oil shock absorbers can be perfectly adjusted to any slope by knurled screws
- Aluminum engine mount
- Steel CVD shafts on front axle
- Track rods adjustable via right/left-hand thread
- Dirt cover for electronic components (controller, receiver and battery)
- 3mm aluminum shock towers F/R
- Prepared for brushless and LiPo operation
- Extremely durable body
- The reinforced plastic parts are on the one hand very resistant and on the other hand provide the necessary degree of deformation to survive many "accidents" without damage.
 
ATTENTION: If you want to run brushed cars with a LiPo battery, the C-rate should not be higher than 30C. Otherwise the speed controller, motor and connectors could get too hot which can lead a damage!

Specifications: 
- Dimensions ( L/W/H) 430x285x155 mm
- Weight 2170 g
- Wheelbase 293 mm
- Ground clearance 40 mm
- Track front/rear 230 mm
- Tires: 105 mm / Width 50 mm front/rear
- Viscosity damper oil: 400 v/h
- Spring: medium
- Damper installation length: 85mm front/rear
- Viscosity differential oil : front 1. 000 / rear 3.000
- Internal gear ratio: bevel gear 13T / ring gear 43T
- Motor gear ratio: main gear 55T / motor pinion 20T (module 0,8) 
 
Technical data speed controller:
- Waterproof 40 A brushed controller
- NiMH / LiPo operation
- Short time load: 180A forward / 90A reverse
- Forward / brake / reverse function
- BEC 5V/2A
- Operating voltage 7.2 - 7.4V
- Motor limit > 12T at 7.4V; < 30.000 rpm at 7.2V
- Connector system: Tamiya
- Dimensions: (L/W/H) 46,5 x 34 x 28,5 mm
- Weight 70 g
- Plug & Drive System
- On/Off switch 
 
Technical data motor Thrust eco: 
- 15 turns
- 30.000 rpm
- 16A
- Size 550
- Shaft: length 9,6 mm; 3,17mm
- Motor dimensions: Length 57mm / 36,7mm 

Technical data servo S40PH: 
- Steering force 4.0kg @ 4.8V
- Actuating time 0,16 Sec / 60
- 25T 
- JR connector
- Dimensions (LxWxH) 40.2 mm x 20.4 mm x 39.8 mm (standard size)
- Weight: 43g 
 
Technical data remote control: 
- 2-channel transmitter
- 3-channel receiver
- Reverse function
- Dual rate and trim adjustable
- Batteries: 4 Mignon AA cells ( not included ) 
 
Delivery includes: 
1 pcs. Sand Buggy ASB1 RTR - 2.4 GHz remote control CR2SV2 - NiMH Racing Pack - UK charger - manual 
 
Required accessories: 
4 Mignon AA cells for remote control 
Average customer rating: 
Number of : 0
Write an online review of this item and show it to other visitors!