1:10 EP Touring/Rally Car "ATC3.4V2" 4WD RTR

No. d´article:  12221V2
1:10 EP Touring/Rally Car "ATC3.4V2" 4WD RTR - Image 1
1:10 EP Touring/Rally Car "ATC3.4V2" 4WD RTR - Image 2
1:10 EP Touring/Rally Car "ATC3.4V2" 4WD RTR - Image 3
1:10 EP Touring/Rally Car "ATC3.4V2" 4WD RTR - Image 4
1:10 EP Touring/Rally Car "ATC3.4V2" 4WD RTR - Image 5
1:10 EP Touring/Rally Car "ATC3.4V2" 4WD RTR - Image 6
1:10 EP Touring/Rally Car "ATC3.4V2" 4WD RTR - Image 7
1:10 EP Touring/Rally Car "ATC3.4V2" 4WD RTR - Image 8
1:10 EP Touring/Rally Car "ATC3.4V2" 4WD RTR - Image 9
1:10 EP Touring/Rally Car "ATC3.4V2" 4WD RTR - Image 10
1:10 EP Touring/Rally Car "ATC3.4V2" 4WD RTR - Image 11:10 EP Touring/Rally Car "ATC3.4V2" 4WD RTR - Image 21:10 EP Touring/Rally Car "ATC3.4V2" 4WD RTR - Image 31:10 EP Touring/Rally Car "ATC3.4V2" 4WD RTR - Image 41:10 EP Touring/Rally Car "ATC3.4V2" 4WD RTR - Image 51:10 EP Touring/Rally Car "ATC3.4V2" 4WD RTR - Image 61:10 EP Touring/Rally Car "ATC3.4V2" 4WD RTR - Image 71:10 EP Touring/Rally Car "ATC3.4V2" 4WD RTR - Image 81:10 EP Touring/Rally Car "ATC3.4V2" 4WD RTR - Image 91:10 EP Touring/Rally Car "ATC3.4V2" 4WD RTR - Image 10
4250650957667
149,95 EUR
inclu TVA hors frais d´expédition
Prix total: {{ totalPrice }} EUR
actuellement pas disponible
Retenir cet article L'article est noté
Disponibilité: (Délai de livraison: )
  • Description
  • Mode d'emploi
  • Information ElectroG3
 
 
The success story continues! We have equipped the ATC3.4 "V2" with some new features that take the vehicle to the next level. 
 
  
    
The chassis comes with 2 sets of wheels ! One set chrome colored on-road wheels for smooth surfaces like asphalt and one set slightly larger white rally wheels for loose surfaces like sand and gravel.
 
 
 
  • NEW* 80A brushed speed controller with T-plug and 540size 15T Motor
  • NEW* Speed controller is programmable
  • NEW* 6kg steering servo
  • NEW* Rally body design
  • NEW* 2 wheel sets included - On-road und Rally     
 
 
 
 
 
The new 80A brushed speed controller is waterproof, programmable and pre-assembled with a T-connector. To fully exploit the potential of the vehicle, we recommend a 2S LiPo battery for operation. In addition, a separately available programming card (item 2110061) can be used to set various parameters such as brake strength, punch, low voltage protection and much more.  
 
The car is driven by a 540 15T brushed engine which directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminum drive shaft. Due to the higher power of the speed controller and the use of T-plugs, any 2S LiPo battery can be used - no matter what C-rate and capacity.
 
   
 
4 oil-pressure shock absorbers provide ideal handling so that a lot of driving fun arises. If you choose the on-road tires, you can make hot drifts on smooth surfaces while the grooved profile of the rally tires provides traction on almost any surface. A 6kg servo takes over the implementation of the steering commands.
 
   
 
Lightweight and compact design, as well as comfortable and ergonomically shaped - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, so that settings can be made easily via levers and knobs. In addition, the remote control has a "beginner mode" (power reduction by 50%) and is therefore ideally suited for novice drivers. 
 
 
  • 4WD all wheel drive
  • 2.4GHz 4-channel radio system
  • 80A brushed speed controller with T-plug
  • 540size 15T Motor mit 32.000 U/min @ 7.4V
  • 6kg steering servo (25T, ball bearing)
  • 4 oil shock absorber
  • Ball bearing main drive
  • Extremely durable composite plastic parts 
  • Steel differential outdrives    
  • Aluminum universal joint drive with steel mounts
  • Adjustable upper track rods
  • 5mm aluminum motor mount
  • 6mm shock towers
  • 2 differentials (front/rear)
  • Stylish touring car body
  • Light-Weight chassis (less weight - longer driving time)
  • Many aluminum option parts available
 
  • Scale: 1:10
  • Dimensions (L/W/H): 470x200x150 mm
  • Weight: 1400g
  • Wheelbase: 260mm
  • Ground clearance: ca. 15mm
  • Track width: 170mm front/rear
  • On-road wheels front/rear: Ø 65mm / Width: 26mm
  • Rally wheels front/rear: Ø 70mm / Width: 26mm
  • Shock-oil: 400CPS
  • Damper installation length: 60mm
  • Internal gear ratio: bevel gear: 13T / ring gear: 38T 
  • Motor ratio brushed version: Pinion: 26T / main gear: 58T (module 0.6)
 
 
  • ATC3.4V2 On-Road/Rally Car RTR    
  • 2.4GHz CR4S radio system
  • Plastic clips for shock absorbers
  • Sticker
  • Manual       
 
  • 4x AA batteries for the radio system     
  • 7.2V NiMH or 7.4V* LiPo car battery (*recommended)
  • Charger (suitable for car battery)
  • Programming card for individual settings of the speed controller         
 
Pour cet article, il existe également Accessoires
Pour cet article, il existe également Piece de Option
Pour cet article, il existe également Pièce de option
Absima GmBH
Gibitzenhofstraße 127 A
DE 90443 Nürnberg
info@absima.com
Evaluation moyenne par les clients: 
Nombre d´/de Evaluations par les clients: 0
Rédigez une évaluation de cet article et communiquez ainsi votre avis aux autres visiteurs!